Description
GIVE BAKED-ON CARBON A THOROUGH BEAT DOWN The AR10 Scraper saves cleaning time by removing built-up fouling fast. Its precision made to match 12 surfaces on all 4 major parts of the bolt carrier group: the bolt carrier, bolt, bolt cam pin, and firing pin. A punch for the firing pin retaining pin is located at the front for quick disassembly. Retaining pin removal makes breakdown easyA specially cut retaining pin punch quickly and easily removes the AR10 retaining pin for bolt carrier group disassembly.11 machined profilesPrecision cut faces on the carbon scraper quickly clean all external and internal surfaces on the bolt, bolt carrier, firing pin (large and small), and cam pin.Each surface is precision milled to out-clean anything else on the market.Clean the bolt One twist cleans the inside and outside of the bolt tail as well as the bolt tail shoulder. Then proceed to scrape between the lugs, the bolt face, and behind the cartridge extractor.Clean the bolt carrierOne quick twist inside the bolt carrier leaves two interior surfaces carbon free and hang-up free.Clean the firing pinEasily cleans both the large and small section of the firing pin with two precision scraping surfaces.Clean the cam pinThe precision tolerances of the milled surface allow for easy and thorough scraping of your AR10s cam pin. Product overview Firing pin (large dia.)Firing pin (small dia.)Bolt cam pinBolt carrier scraper (2)Bolt tail interiorBolt tail exteriorBolt tail shoulderBolt waistBetween bolt lugsBolt faceBehind-cartridge extractorRetaining pin punch 1/4″ bit driverBottle opener
